DATOS DEL PROYECTO

CALL: R&D TECHNOLOGY TRANSFER PROJECT “CERVERA” - CDTI

EXP. ID: EXP 00126441 / IDI-20200476

PROJECT TITLE: RELIABILITY ASSURANCE AND QUALITY IN IRON AND STEEL PROCESS OF PEELING AND DRAWING OF BARS AND WIRE.

ACRONYN: SMART-DRAW

CONFINANCED BY CDTI AND FEDER

OBJETIVE: The main objective of the project is to process iron and steel bars under the paradigm of "ZERO defects" by means of sensors and monitoring of the most critical points during the process. Thanks to that, it is possible to anticipate to defects and malfunctions, getting a high quality product

This project is being executed at ISEND facilities, Luis Proust 10, Parque Tecnológico de Boecillo (CP 47151) in Valladolid, Spain.

The project started in 01/01/2020 and will be finished in 31/10/2021.

Total budget granted of the project is 434.246,00€, Call - R&D Technology Transfer Project “Cervera” – and is cofinanced by Centro para el Desarrollo Tecnológico Industrial (CDTI) and the Fondo Europeo de Desarrollo Regional (FEDER).

Call: Retos-Colaboración 2019

EXP Number: RTC2019-007054-4

Title: DEFESOL: Estudio y DEtección de la deFEctología originada por el proceso de SOLdadura de fricción mediante corrientes inducidas.

Description: The DEFESOL project consists in the development and validation of a non-destructive control tool based on the eddy current technology, which has the ability to detect the defects that are produced during the shaking-friction welding of structural joints in aluminum alloy. The tool to be developed should have the potential to be inserted both in a productive context and in the field of structural monitoring to obtain a more robust process, a reduction of production costs and to allow the control of the welding quality not only during the manufacturing process but also during the lifetime of the structural joint.

Note: The DEFESOL project team (RTC2019-007054-4) is being funded through the RETOS COLABORACIÓN 2019 Program of the Ministry of Science, Innovation and Universities.