Articles Tagged ‘Isend - eddyeyes’

EDDYeyes, going to ZERO defects

So far, ZERO defects were a utopia. Now it’s a trending topic. Going to ZERO is an exciting trip.


The isend EDDYeyes’s solution has become the solution of all Rolling mills to assure high quality production, because for the first time, it’s possible to head to ZERO defects with an integrated solution.
EDDYeyes combines eddy current testing (ET) given by the HOTdiscover system that detect defects online up to 120m/s at 1200ºC, and digital imaging with the EDDYeyes Vision system that will take images in real time of the defects detected by the ET system and associates and stores it with the signal for a real time or further analysis. Once the defect and its typology are known, the challenge is to characterize them and establish the relation to the cause that produces them so that corrective actions can be implemented in the process to avoid future occurrences.
EDDYeyes opens the door to faster decisions with an accurate and intuitive way to analyze rolling mill defects.

Thus, for the first time, 100% of defects types are detectable and “ZERO defects” is closer than ever. Thanks to this, rolling mills can supply higher quality wire rod. This last generation equipment can report every type of defect including information such as exact position, shape and depth (map of defects).
EDDYeyes is ready for the industry 4.0 and can be integrated in rolling mills with a huge set of integration capabilities. A complete set of production parameters can be attached to the map of defects with new and productive ways to take advantage of almost every coil to be delivered. So, the map of defects can easily be extended to a full map of the coil.

EDDYeyes, hacia defectos CERO

So far, ZERO defects were a utopia. Now it’s a trending topic. Going to ZERO is an exciting trip.


The isend EDDYeyes’s solution has become the solution of all Rolling mills to assure high quality production, because for the first time, it’s possible to head to ZERO defects with an integrated solution.
EDDYeyes combines eddy current testing (ET) given by the HOTdiscover system that detect defects online up to 120m/s at 1200ºC, and digital imaging with the EDDYeyes Vision system that will take images in real time of the defects detected by the ET system and associates and stores it with the signal for a real time or further analysis. Once the defect and its typology are known, the challenge is to characterize them and establish the relation to the cause that produces them so that corrective actions can be implemented in the process to avoid future occurrences.
EDDYeyes opens the door to faster decisions with an accurate and intuitive way to analyze rolling mill defects.

Thus, for the first time, 100% of defects types are detectable and “ZERO defects” is closer than ever. Thanks to this, rolling mills can supply higher quality wire rod. This last generation equipment can report every type of defect including information such as exact position, shape and depth (map of defects).
EDDYeyes is ready for the industry 4.0 and can be integrated in rolling mills with a huge set of integration capabilities. A complete set of production parameters can be attached to the map of defects with new and productive ways to take advantage of almost every coil to be delivered. So, the map of defects can easily be extended to a full map of the coil.

ISEND presenta EDDYEYES

ISEND ha desarrollado una nueva solución para la inspección superficial de alambrón y barra laminada en caliente.

Isend presenta ponencia en AISTECH 2019

Hot rodIsend presentará una ponencia en la AISTECH 2019 que se celebrará en Pittsburgh. Pensilvania, USA. El ponente será el Sr. Bruno Chedal, experto mundial en procesos de laminación.

David L. Laurence Convention Center

Room 308. Día 6 de Mayo a las 10:30 de la mañana.

Se podrán ver por primera vez imágenes de defectos en alambrón de 5,5mm de diámetro a 100m/s y 1000ºC de temperatura con una nitidez hasta ahora desconocida.

 

 

Isend to present lecture at aistech 2019

ISEND will present a lecture at AISTECH 2019 that will be held at Pittsburgh, PA, USA. The speaker will be Mr. Bruno Chedal, Rolling Mill Expert

David L. Laurence Convention Center

Room 308, May 6th 10:30 AM

You can see for the first time wire rod images at 100m/s and 1000ºC (5,5mm diameter).

Hot rod

Contact us

  • We are here.
    PARQUE TECNOLÓGICO DE BOECILLO
    C/ Luis Proust, 10
    47151 Boecillo - Valladolid
    (Castilla y León) - España (Spain)

    (+34) 983 132 307
  • Contact us.
    This email address is being protected from spambots. You need JavaScript enabled to view it.
    in: https://es.linkedin.com/in/isend

 

* refesh*
We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.